|
|
|
|
|
|
|
|
|
|
|
6 Degree Rake Fits 1997-Present Touring Models Fits All Stock OEM Applications Tree Comes Machine Finished CNC from 6061 Billet aluminum Complete With Al Hardware
|
Keep stock trail Designed for use with 21" and 23" wheels
|
Properly rake your FL Softail for the use of 21", 23", and 26" wheels Constructed from CNC billet aluminum Upper exposed triple tree is chrome-plated for a clean look, hidden lower triple tree is anodized black Each triple tree kit includes billet top and bottom trees fork stem lower bearing and all necessary hardware When using 21" or 23" Stock length forks ( 30 1/2" long) are recommended. 26" wheels require the use of 1" shorter fork tubes Always check fender clearance under full compression limit fork travel if needed 00-13 FLST, FLST Models
|
|
|
|
|
|
|
|
|
|
|
|
|
These 11 degree billet triple trees will properly rake your bagger for the use of 21", 23" and 26" wheels. No cutting welding or custom fabrication needed of any kind. Extensively road tested this kit is the best handling raked tree kit available Attain close to stock handling with large diameter front wheels Designed exclusively for 21" 23" and 26" front wheels Stock diameter wheels will not work with triple tree kit When using 21" front wheel the trail is 4 1/2" 23" wheel trail is 5 1/4 and when using 26' front wheel the trail is 6" Does not require modification of stock frame Fairings also maintain stock position and does not require angled headlight wedges or special brackets to properly adjust headlight When using 23 or 26 front wheels on Road Glide models a fairing bracket is recommended for increased fairing clearance Designed to fit all 97-13 FLT Touring Models (Exc Road King)
|
(Factory Frame Rake= 26 degrees)
• Factory Triple Tree rake is 4 degrees. Our trees are a 12 degrees over stock for the 30" kit,
• Using our kit the neck is extended 1.5” forward and 1” up on the 30"
• The total resultant rake using our neck rake builders kit is 47 degrees for a 30" wheel.
• The resultant trail will provide proper handling at both low and hi speed.
•A couple of other things to note for Roadglide
models: The inner fairing mounting bracket will have to be modified
& extended to allow adequate clearance for the triple trees. In
addition the engine guard will need to be replaced by a custom lower
fairing support bracket. We can help you with both of these items. If
you have any other questions let us know.
Our neck Rake Builders
Kit contains Triple Trees, weld-in piece, inserts/extensions, and
template only. Other parts mentioned are SOLD SEPARATELY.
|
This is about the same as leading weld on kits but NO WELDING,
NO CUTTING, JUST BOLT IT ON. You can unbolt the kit if you get tired of
the big wheel and put your Harley back to stock.Fits 1997-2015 HD
Touring models The specs for a 26 wheel kit are +4 in the neck and 8 Degree
trees. So the total neck rake ends up at 38 Degrees. Geometry is Similar
to the American Suspension weld in neck that is specifically designed
for the 26" wheel The specs for a 30 wheel are +9 in the neck and 12 Total in the
trees. This is similar to what many weld on kits are using and will work
great on your Harley Davidson Motorcycle.
The full kit includes - Neck, Stem, Trees, Bushings, Fork Caps, and Bearings. $1,499 MSRP.
|
|